Ultra Wide Bandwidth HDTV 9 x 9 1 RU Matrix Switch
Accepts
Any Remote Control or RS-232
Back panel image
Ever wished you could view full quality HDTV throughout your
house without a closet full of equipment in every room? VMX99 integrates
everything you need to distribute all your HDTV video to all
the displays throughout your home.
VMX99 is the smallest 9x9 rack mountable matrix switch
on the the market. We save you precious rack space without sacrificing
performance.
The VMX99 has the following features
- 9 input HDTV component video sets
- 9 independently controllable HDTV component video output
sets
- Remote IR control with Zerokey code learning ability
- RS-232 input for serial control
- Flash based micro controller which allows firmware updates
over the RS-232 port
- Professional quality video amps capable of driving cables
up to 300'
- Designed and tested to pass all video signals up to and
including 1080p
- Slim 1 RU steel rack mountable case
- Optional rack mounting ears
Flexible control options
VMX99 can be controlled by several methods, you can choose the
one the best fits your home theater control scheme.
- Manual control using the front panel buttons
- IR control using a programmable remote. You can
download the Pronto codes needed
here. The raw
Hex format is
here.
- IR control using your standard remote. Zerokey
can learn any remote keys to control VMX99
- RS-232 control with a PC or your existing home theater
controller. RS-232 programming guide
here
Supported by:
Video distribution
VMX99 is the ideal amplifier for driving long video cables in
your home. Many vendors claim their products can do this, but very few can
accomplish this without distortion of the video. The most important
amplifier design factors in driving long cables are source impedance matching,
output connector quality, amplifier bandwidth, and amplifier current drive and
slew rate. Our amplifier uses the best components for all these, resulting
in the best signal distribution you can get.
ZeroKey technology
The remote control interface can use ZeroKey
infrared code cloning to map any remote control key to each of the inputs &
outputs. ZeroKey technology is compatible with virtually all remote
controls, and does not interfere with the normal operation of the remote.
Please see our quick start guide
for a description of how to program for an IR remote using ZeroKey.
ZeroKey programming is stored in flash memory, and you will
not need to reprogram even if you lose power. If you buy a new remote in
the future, don't worry, the VMX99 can be reprogrammed as much as you like.
Unit includes:
- VMX99 HDTV matrix switch as pictured with 3 year warranty
- 12V DC desktop power supply with 30 day warranty
Specifications:
- 27 High bandwidth analog inputs
75Ohm terminated at all frequencies
Gold plated matched low impedance RCA jacks
1Vpp nominal input swing (Ypbpr) or 1.3Vpp (Cvbs)
4Vpp maximum (DC invariant)
DC rejection via capacitive coupling
Crosstalk < -80 dB
- 27 High bandwidth analog outputs
Source impedance 75 Ohms
Gold plated matched low impedance RCA jacks
All output sets individually controllable/switchable
Selectable AC or DC output coupling
High performance amplifier capable of driving over 300ft of
coax cable per output
2V/V gain to properly drive output
load termination (zero effective gain at display)
-3dB bandwidth > 100 Mhz
- IR receiver (front)
- RS-232 control input (3.5mm female stereo)
- Internal design
Flash programmable micro controller
enables ZeroKey remote technology
Ultra wide bandwidth integrated buffered t-switch matrix prevents crosstalk or signal
distortion
Independent professional quality video amplifiers for best performance
High reliability capacitors and self resetting fuse
protection for long life
Designed and manufactured in the USA
- Housing
Black steel rack mountable housing 17" x 13" x
1.75" (1 RU)
Online manual (word document) IR remote programming
guide
VMX family coupling change
instructions
CLEARANCE PRICING
Shopping cart
